Dubbers, Inc. - View Single Post - My Little Project
Thread: My Little Project
View Single Post
  #1 (permalink)  
Old 06-13-2009, 12:10 PM
keyratGTI's Avatar
keyratGTI keyratGTI is offline
keyratGTI has no status.
 
Join Date: Dec 2008
Location: Key Biscayne
Posts: 232
My Mood:
Thanks: 0
Thanked 5 Times in 5 Posts
Activity Longevity
5/20 10/20
Today Posts
ssssss232
My Little Project
So I started a project to customize a votex rear for my MKV. Project is that i am going to have turn down exhaust and have a clean rear. Here are some pics of my work that I have done so far. BTW shitty iphone pictures. comments, questions, opinions, or anything welcome.

here you guys go. It started like this.
Click the image to open in full size.

then i sanded down the difuser.
Click the image to open in full size.

plexi glass i bought, used a heat gun to get the angle of the rear.
Click the image to open in full size.

this is right before i cut the plexi glass, i used a dremel btw.
Click the image to open in full size.

this is after i cut it, this is the front side, i used plastic epoxy to attach it.
Click the image to open in full size.

this is the back side of the plexi attached to the bumper.
Click the image to open in full size.

I bought bondo to fill up the gaps, and then i have to sand it down smooth and straight, primer and then paint. ill keep updating with some pics as i continue to work on it. i hope to be done in about a week or so.
Reply With Quote